John Deere 1025R rops accessories
Clamps, rails and brackets that attach to the roll bar. This is where most open-station accessory mounting starts and where most fitment mistakes happen.
What decides whether it fits your 1025R
- Roll-bar tube cross-section and dimensions. Two machines in the same family can differ: John Deere 2025R early builds use a 2 x 2 in tube and late builds use 2 3/8 x 2 3/8 in
- Round versus square tube, which are not interchangeable
- Clamp load rating and how far the accessory hangs off the bar
- Whether the roll bar folds, and whether the accessory still clears when folded
What we know about your 1025R
- ROPS tube cross-section
- 2 x 2 in square tube, 31 1/2 in outside-to-outsideMeasure yours to confirm.
- Production years
- 2013 to 2026
- Weight
- 1,444 lb
- Wheelbase
- 57.1 in
- Height to top of ROPS
- 86.2 in
Our picks
We have not verified any rops accessories for the John Deere 1025R yet
We would rather show you nothing than show you a product we have not checked against this machine. Nothing here has been filled in with a near-miss from the same category. The searches below are a good place to start, and the fitment notes above tell you what to measure before you order.
Search for yourself
These open a search. Nothing in the results is a fitment claim from us, so use the checks above before you order.
- Search Amazon for John Deere 1025R rops accessories (opens Amazon in a new tab)
This opens a search on Amazon. Results are whatever Amazon shows today, and a listing appearing in them is not a statement from us that it fits your machine.
- Search eBay for John Deere 1025R rops accessories (opens eBay in a new tab)
This opens a search on eBay. Sellers write their own fitment claims, and those claims are not verified by us. Check the part number against your own machine before buying.
Who is best for this
- 1
Amazon
- Broadest selection of current accessories: mounts, storage, lighting, electrical and maintenance supplies
- Fast, predictable returns, which matters when a fitment is uncertain
- 2
eBay
- The best place to find a discontinued or superseded part by its manufacturer number
- Used OEM parts, dealer surplus and takeoffs from parted-out machines
- Trim, panels, knobs and caps for machines too old for the current parts system
Read before you buy
How to measure your roll bar before you buy anything
Most accessory returns on an open-station machine come down to one wrong measurement. Here are the three numbers to take, and why the model name will not tell you.
How to choose a phone mount that survives a work day
Clamp size gets all the attention. Vibration is what actually kills phones on this equipment.
Why the factory cup holder does not hold your bottle
Most factory holders were sized for a soda can. Here is what to measure, and what the options are.
Open station or cab: why it changes everything you can buy
The single biggest fork in accessory fitment is not the make or the model. It is whether the machine has a cab.
Buying a canopy for an open-station tractor
Canopies are sized to the roll bar, not to the model. Get the width right and most of the decision is made.
Equipment manufacturer names, model numbers and part numbers are used only to say which machine a part relates to. FitMyMachine is independent and is not affiliated with, authorised by, or endorsed by any equipment manufacturer.